Currently there is a $60 low cost for the Aufero Laser 2 once you order it immediately from Ortur.
It has an analogous engraving space as their higher identified Laser Master 2 Pro, however it’s cheaper placing it someplace between the smaller Laser 1 and the Laser Master 2 Pro.
It’s out there with three totally different laser modules:
LU2-2 = 1 to 1.6W optical energy, the entry stage mannequin for $269.99
LU2-4 SF = about 5W optical energy (just like what others promote as 20W electrical energy) with a brief however smaller focus level for extra detailed engravings for $369.99
LU2-4 LF = about 5W optical energy (just like what others promote as 20W electrical energy) with an extended however larger focus level, so it is in focus over the thickness of the fabric you wish to minimize, making cuts simpler for $369.99
The deal value is the one for the LU2-2. It’s ample to engrave wooden, cardboard, paper, leather-based, materials, darkish acrylic and a few coated metals. Cardboard, paper and materials can be minimize.
Controller board with ESP32 controller, 32Bit
Various security methods like anti-tilt
Frame materials: aluminum
Large 39x39cm engraving space (15.35in x15.35in)
Motors NEMA 17 stepper motors
Optical energy 1.000-1.600mW
Wavelength 445±5nm
Focus: Fixed focus
Engraving pace as much as 10.000mm/min
Operating system Win XP, Win 7, Win 8, Win 10 with LaserGRBL (free) Mac and Linux with LightBurn
Input format JPG, JPEG, PNG, BMP, SVG, and many others.
Power adapter with 24V, 2A
Operating temp. -20°C to 50°C
https://ortur.net/collections/las…3962441961
